The successful and well-tried fire-fighting-centrifugal pump FPH 38/10 – 2.5/40 will be installed as a rear-mounted pump on fire-fighting vehicles and on triple combination pumpers. The fire-fighting-centrifugal pumps have a 2-stage design and work in very low rpm ranges. They are powered via a multi-stage prop shaft from the vehicle’s power take-off. The water can be pumped either from open water sources or from the vehicle’s water tank.
FPH 38/10 2,5/40 | ||
Nominal pressure [bar] | 10 | 40 |
Nominal capacity [l/min] | 3800 | 250 |
Nominal speed [1/min] | 3400 | 3400 |
Power take-off performance min. [kW] | 220 | 220 |
Power take-off torque [Nm] | 500 | 500 |
geod. suction lift [m] | 3 | 3 |
presssure outlets | 3 x DN 100 (4") | 3 x DN 100 (4") |
suction inlet | 2 x DN 65 (2½") | 1 x DN 32 (1¼") |